Search found 8 matches for Admin

megaupload.com EC8SJJIH

thats the link to download cheatmaster

Subject: MKULTRAv3/hijacks Tue Feb 17, 2009 3:14 am

--------------------------------------------------------------------------------

This is the MKULTRA V3!!!
NOW RELEASED!!!
This comes with the hijacker also.
To hijack somebody's name and clan tag open up MKULTRA, press R all the way over to the [X] tab.
Press start on the selected person's name.
Enter what you want in the text box.
Then just press start again.
Then close(O).
And there name or tag should be changed.

Side Effects:
-Cant have Nightpr enabled.
-Holds less codes then Nightpr.
-Your clan tag does not show.
-If you hijack someones name who has a bricker on it will not show. But You Can Still HiJack There Tag
Installation

1.) Download below
2.) Go into the MS_ROOT folder of the file you downloaded.
3.) Open your PSP in USB mode.
4.) Drag the contents of the MS_ROOT folder you downloaded to your Memory Stick's Root. If you do not know what your Memory Stick's Root is then read THIS.
5.) Add the following code to your game.txt and enable the plugin in recovery:

Must put this in game.txt in seplugins folder

<BLOCKQUOTE>ms0:/seplugins/MKULTRAV3.prx
</BLOCKQUOTE>

Put This In Your PRX's


Code:
megaupload.com 0IVWXPUN


GUIDE MADE BY RUSTY
SPECIAL THANKS TO LIL_WHOOPER_ AND SKILL64

Subject: MKULTRA.prx Fri Jan 23, 2009 12:32 am

--------------------------------------------------------------------------------

megaupload.com 33EI1XHG

ms0:/seplugins/MKULTRA.prx

PUT THIS MSO IN GAME TXT

DELETE NIGHT PR PRX BUT NOT THE FOLDER IF YOU HAVE NITE PR

CLICK AND DRAG THE MKULTRA.prx INTO YOUR SEPLUGINS

THIS IS A GOOD PRX.IT HOLDS A LITTLE LESS THEN NITE PR REV K BUT IT HAS ALL THIS

Features




You can now type in a text search faster by pressing start it will then bring up a keyboard, remember while searching text it only searches CAPS so make sure caps lock is on.

You can now rename cheats, from the nitePR menu by pressing start on the selected cheat.

There are two decoders and browsers, go over to one of the browsers and press START it will change to a decoder. while on the decoder press SELECT and it will show ASCII aka text like a browser.

You can also rename cheats in the menu just highlight the cheat code you wanna change and press START and a keyboard will pop up rename and hit done. (Dont forget to save so it becomes permanent)

There is also the option for usb in the PRX menu just plugin your usb cable and enable USB in the menu edit your database and use the added Reload Cheats function and the codes are available right away.

You can search for text and then look for the same result by narrowing it down with a hex search

Subject: NITE PR REV K Sat Jan 10, 2009 4:15 am

--------------------------------------------------------------------------------

megaupload.com RKYB1WFF

I uploaded but I don't receive credits for making this application.

After the download finishes you will get a WinRAR archive, extract it, after it finished

you will get a folder called nitePR, open it and you will see 3 folders named Docs, files,

legal. And 2 applications nitePRed and DMAhunter. Well open the one called files:

You Will see 2 folder's open the one curresponding your CFW. (I'll use 3.71M33 only)
Open the folder and you will see another folder called seplugins press the right mouse

click and select copy then connect your PSP to your computer via USB, and you will

immeadiatly land on the root of your memory stick, paste the seplugin's folder and then go

back to XMB - Xross Media Bar PSP menu now restart your PSP and keep the R-Trigger and you

will see a black screen and white letter's click the option Plugins -> and you will see

this "nitePR.prx [GAME] (Disabled) press X to enable it. Go to game and a message will pop

up saying press Home button twice and then - and + from the volume and nitePR will pop up.

There you go you installed nitePR on your PSP. Congratulations.

#2 Now I'll tell you how to put codes on nitePR.

If you are in this part then you already installed nitePR. If not then read the upper

guide.

After you have installed nitePR you might wanna add some codes if you don't know how then

don't worry I'll tell you in this guide. First of all connect your PSP to your computer via

USB. Then after you're on the memory stick root, open the seplugin's folder and you'll see

four files: nitePR folder, conf bin file, game txt file and nitePR.prx.

Open the nitePR folder and and make a .txt document with the game ID example MOHH2 -

ULUS-10310 that's the game ID so you made the text and you have the codes you want, copy

and paste in the desired game txt and go to game and open nitePR and if you see the codes

then you have done it. Congrats.

NitePR codes have the number icon - #

Example

#Normal Flash
0x0016ADC0 0x3c0440A0

So Hope I helped you install you nitePR and put codes. Don't take credit for this shit. Written by Sly Xross/John/DJfire.

--------------------------------------------------------------------------------

For slim or fat. How to is in the file.

sendspace.com jy1kf4 <------DOWNLOAD HERE

Subject: HOW TO MAKE MAGIC MEMORY STICK/HOW TO UNBRICK PSP..I FOUND THIS ON DIFF SITE Wed Jan 07, 2009 11:31 pm

--------------------------------------------------------------------------------

Lets get started ... A pandora's battery is a special service battery along with the ?magic memorystick? that can downgrade and unbrick any psp (even 3.52) . You can now bring your dead (bricked) PSP back to life or downgrade any [color:2271=#33ff00! important][color:2271=#33ff00! important]firmware psp , yes ANY FIRMWARE - 100 % . This amazing breakthrough is all thanks to the Noobz! team which has some of the best PSP hackers . So here?s how to make your normal battery and memorystick into a Pandora battery and magic memorystick . The tutorial looka kinda complicated (I tried my best to simplify it) but hang in there it aint as hard as you think it is . Please follow the instructions carefully.


NOTE : Vista users try using XP , vista seems to give loads of trouble .


NOTE TO NEWBIES: you have to make your normal battery into a pandora?s battery via [color:2271=#33ff00! important][color:2271=#33ff00! important]software and stuff not by manually short circuiting it or something

REQUIREMENTS :
1) A spare PSP battery (recommended) , any make will do .


2) A spare memory stick PRO DUO (it has to be PRO DUO)


3) A PSP with Custom firmware ( OE or M33) or a 1.5 PSP. Ask you friends if you don't have oen ,or search for one .

INSTALLATION :
1) Take out the 1.5 or Custom firmware PSP ( OE or M33) and put in the spare memorystick (it has to be pro duo) and spare battery that you wanna modify .


2)Now you gotta format the [color:2271=#33ff00! important][color:2271=#33ff00! important]memory [color:2271=#33ff00! important]stick FORMAT MEMORY STICK


3) OK now download this pack from here . and EXTRACT it with WinRAR . Don?t have Winrar Download it from here


4) Now extract the PANDORA folder from the downloaded pack to the desktop . Inside the Pandora folder you will find two other folders ?msinst? and ?mspformat?


5) Connect you PSP to the [color:2271=#33ff00! important][color:2271=#33ff00! important]PC via USB cable .


6) Now in you [color:2271=#33ff00! important][color:2271=#33ff00! important]computer RUN and type in CMD and click on OK . A [color:2271=#33ff00! important][color:2271=#33ff00! important]black [color:2271=#33ff00! important]box will popout .


? Now I told you to you to extract the folders to the Desktop . So copy the location of the msformat picture here , paste it followed by the drive letter of [color:2271=#33ff00! important][color:2271=#33ff00! important]your [color:2271=#33ff00! important]PSP (eg my psp drive removable disk (I the letter is I )

Now if your PC shows C:/ in your CMD copy the address bar and paste it in followed by the letter of your psp drive .

C:\Documents and Settings\username\Desktop\PANDORA\mspformat\mspformat.exe I


IF you PC shows copy the address bar and paste it in followed by the letter of your psp drive

Desktop\PANDORA\mspformat\mspformat.exe I


Keep trying till you get this prompt (like mine) :

Desktop\PANDORA\mspformat\mspformat.exe I

You are about to format the drive I .

All Data will be lost . Do you want to continue? [Y]

Then you type in y and you will see
Drive successfully formatted, and partition moved.

After that you can close the CMD box

9) Disconnect your psp from the PC and remove the memory card and turn of the PSP , then place the MS (MS=memory stick) back in and turn the PSP on . Then reconnect you PSP to the Pc . NOTE: You have to do this ?

10) Now download this pack from here , extract it with WinRar and copy the PSP folder and the UPDATE.PBP to the ROOT of the PSP memory stick . If you you have a 1.5 PSP no problem , If you have Custom Firmware make sure you turn on the 1.5 kernel mode ( to know how see here)

11) Disconnect your PSP . Scroll to GAME and click on ?Pandora?s Battery Firm. Installer? it will take a few moments . After its done remove the MS from the PSP turn it off then place it back in and turn the PSP back on again, you HAVE to do this .

12) Connect your PSP to the PC . A Few files and folders will be formed in your ROOT , now copy the msipl.bin from the root to the ?msinst Folder? which is inside your extracted Pandora folder . It should look like this

RUN type in CMD . That black box will open again . Now copy the address of the msinst.exe followed by the PSP drive letter followed by the address of the msipl.bin

Now if your PC shows C:/ in your CMD it should be something like this (with reference to PSP?s drive as I)

C:\Documents and Settings\username\Desktop\PANDORA\msinst\msinst.exe I Documents and Settings\username\Desktop\PANDORA\msinst\msipl.bin


IF you PC shows then it will look something like this :

Desktop\PANDORA\msinst\msinst.exe I Desktop\PANDORA\msinst\msipl.bin


If you did it right you will get a prompt like (this promp will differ from PC to PC) :

PSP MS IPL Installer
Load IPL code msipl.bin
241664 bytes(59 block) readed
Target DRIVE is 1
Check partation Sector
boot status 0x80
start head 0x0B
start sec/cyl 0x0018
partation type 0x06
last head 0x7F
last sec/cyl 0xCFE0
abs sector 0x00000177
ttl sector 0x0003CF689
signature 0xAA55
Check BPB Sector
signature AA55
Check free reserved sector:OK
Write ABS Sector 0x10 to 0x1E7
Are You Sure ?[Y]

Type in Y and you will get

Write MS BOOT CODE


Congrats you now have a Magic Memory stick . Now Disconnect your psp from the PC and remove the memory card and turn of the PSP , then place the MS back in and turn the PSP on .

NOTE : if you get

PSP MS IPL Installer

Load IPL code msipl.bin

Can?t open msipl.bin


The location (address) of the msipl.bin is WRONG (i got this like 100 times until I figured it out just keep trying ?)

NOW MAKING THE PANDORA UNBRICKING BATTERY :


14) After you have the magic MS leave it in the PSP then , Turn on your psp and go to Pandora?s battery Creator , make sure you have the spare battery in it . I Recommend backing up so you can make the pandora battery into a normal one press ?triangle " first it will back up then go to ?Pandora?s battery Creator? again and press X ? You normal spare battery is now a ? PANDORA UNBRICKING BATTERY ? WOO HOO? You did it .

NOTE :when the Pandora?s battery Creator loads and if you get ?ERROR at address 0x27? or a similar error you are screwed , you cant turn that battery into a Pandora battery but you can use it as a normal battery . Use another battery and try again . How do I know this ??? coz I got screwed too : P .

Subject: HOW TO MAKE PANDORA BATTERY.GOOD GUIDE FOR ALL PSP BATTERIES Wed Jan 07, 2009 11:27 pm

--------------------------------------------------------------------------------

This section if for a PHAT battery
Use something plastic (like a guitar pick, disposable picnic knife, ect...), to split the battery open. Do so by starting in the seams that run around the edge and work your way around untill you get it completely apart. Be extra carefull when you get close to the connections on top. If you feel the need to use something metal to take the battery apart do so at your own risk. I used a sharp, very pointy, steel pocket knife. Just dont cram it in to far or touch anything metal other that the pin you need to touch. (metal to metal shorts out circuits, and your playing with a live [color:aaab=blue! important][color:aaab=blue! important]circuit [color:aaab=blue! important]board here) Refer to the pictures...



Once you get the battery open find the little black square located near the bottom right. It should have writing on it such as TExx and S93056. This is where you will need to remove a small pin from one side of it. On the main board (the green part) of the battery itself will be writing near one end of the black square such as ICO4. The pin under the 4 is the pin you will need to remove. Refer to the pictures...



As you can see from the pictures the pin on my battery is allready removed. Use anything you want to remove the pin from your battery. I used a sharp knife and gently cut the pin off. BUT REMMEMBER if you touch two of the pins at the same time, or slip and close the circuit between anything metal (ie. have the tool your using, such as a metal knife, touch two different parts at the same time) you could run a chance of ruining your battery.

When you get the pin removed put your battery back together. Use a peice of clear tape around the edges to hold your battery together. Dont use to much tape or the battery will kinda not fit properly into your [color:aaab=blue! important][color:aaab=blue! important]PSP anymore, you'll have to push it in a little more than you did before.




Pic courtesy of ACUREON...


Pic courtesy of ACUREON...



---------------------------------------------------------



HERE ARE SOME MORE PICS OF A DIFFERENT TYPE OF PHAT BATTERY, COURTESY OF SMAX...
The battery at hand is a [color:aaab=blue! important][color:aaab=blue! important]Sony 1800mAh purchased about a year ago


This image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 120KB.




This image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 126KB.




This image has been resized. Click this bar to view the full image. The original image is sized 798x597 and weights 241KB.





----------------------------------------------------------




This section is for a SLIM battery

This image has been resized. Click this bar to view the full image. The original image is sized 640x480 and weights 49KB.


Note: This picture was originally posted by Gandalf at PSP Crazy...


Once again: I AM NOT RESPONSIBLE FOR ANY DAMAGES DONE BY USING THIS METHOD

a pandora is a tool that helps you get custum firmare.with custom firmware you can hack in games.and do lots of stuff.you can also put full games on your memory stick

join our clan called NIKE™ IT IS THE BEST CLAN EVER we hold tryout rooms in US-EAST.Just look for ...Nike6.0... ...NikeAir... ...NikeOwnz... well be there!!!!!!!!